PCL WOOD 3d printer filament 1.75mm
1 Kg of PLA, (Polylactic Acid), spooled for 3D Printing use. PLA is a bioplastic which transitions quickly from liquid to solid. This makes it an ideal printing material, one of the most commonly used in consumer 3D printing (along with ABS).
This PLA features tight dimensional accuracy and prints really well (we use it every day here)
Tips and Tricks for Printing in PLA Like a Pro
Get the first layer right! Most prints succeed or fail based on the first layer. Be sure to level the print bed and to home the printer. Then print onto Kapton tape to help make sure your print sticks to the bed throughout the whole print. An alternative to printing on Kapton tape is to print with a heated bed and print straight onto glass. Heat the bed to 70C.
If your first layer fails to stick to the bed then be sure you have a level bed, make sure the print head is close enough to the bed, and make sure you have run the extruder before beginning the print.
Temperature is King - each time you try a new filament realize that you may need to experiment with the ideal print temperature for your machine. Each machine is a little different so start with our suggested range (185C-205C) and move up or down in 5 degree increments until your prints look perfect.
If you are printing too hot, your print will look stringy or your extruder will look like it is leaking filament.
If you are printing too cold you will notice that your filament is having trouble adhering to each layer and the surface will look very ruff.
|Type||3d printer filament|
1.We have color matching department specially for developing new color and maintain color quality during production.
We have QC to monitor the quality during production with certain facility and outgoing inspection before shipping.
2.All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material.
3.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
4.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75mm/2.85mm/3.0mm,
Will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.
Q1: Is PopBit a factory or Trading company?
PopBit is a factory do 3d filaments overtime, located in Guangzhou, Guangdong.
Q2: Is it possible to print my logo on products and package?
Yes, of course. OED&ODM for logo and packing is accepted.
Q3: May we get a sample of the product?
Yes, we provide free samples but not mailed. Please contact us to check sample details.
Q4: How many colors of the filament?
There are 30 colors including regular colors. Glow in the dark colors available to choose. Customized colors is accepted too.
Shenzhen Qihang electronics Co ltd has involved in 3d printing field since 2014. manufacturing FDM filaments. We have 70 emplyees in factory, 25 of them are R&D team members. The factory's production has been automated. Our company is extreamly emphasis in new filament and material technoogy development. Our main market is: USA, Europe, Russia, Australia etc. We promise to provide high quality and best serivce to all of our customers.